Air Compressor/Generator/Welder Combination | AGW-SR14-B

  • Capacity 0 - 19 CFM




    offering the convenience of three machines in one, this new model combines a 220-amp arc welder, two-stage air compressor and a 5000-watt generator with a 688cc honda ohv engine. you'll save space and money and reduce your load capacity with this new combination unit. and with only one engine powering these components, you'll also save time on serving parts and maintenance.

    generator mode
    ac current only · selector switch set to idle down –engine will idle down when generator is not in use and tank pressure is 175 psi · switch is set to full throttle –engine will run full throttle continuously

    welder mode
    dc current only · selector switch must be set to full throttle

    compressor pump
    splash lubricated cast iron crankcase to extend the hours of performance · cast iron head for heat dissipation · durable stainless-steel braided discharge hose · quality pilot valve unloader

    brush-type 2 pole 120v/240v alternator · total harmonic distortion (thd) less than 6% · 100% copper windings

    220 dca arc welder · amperage selection switch

    powder coated asme coded 20-gallon receiver tank · 1/4-inch base plate to reduce vibration · 14-gauge powder coated four-piece belt guard

    belt tightening system pulls engine straight to ensure constant belt alignment · manual drain valves for proper maintenance · regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel for extra cooling and longer life · 10-gallon fuel tank capacity

    *equipped with 150-psi maximum rated regulator.




    displacement/engine 688cc honda ohvwith electric start (cables are included, battery not included)
    rated speed 3600 rpm
    cfm @ 175 psi 29.0
    tank 20-gallon receiver tank
    max. ac output 5000 watts
    rated ac output 4500 watts
    alternator wattage 4500 watts
    frequency/voltage 60hz/120v/240v
    max. amps (120v/240v) 41.5/20.8
    cont. amps (120v/240v) 37.5/18.8
    receptacles (2) 120v, 20a gfci duplex - 120v/240v, 20a twist lock
    duty cycle (10 min. run time) 220a @ 40%, 190a @ 60%, 150a @ 100%
    dc voltage 50-220a working range


    weights & dimensions


    net weight 803 lbs.
    shipping weight 870 lbs.
    length 47 in.
    width 24 in.
    height 50 in.
    • product specification

      • cfm (capacity)
        15.7 cfm @ 175 psi
      • controls
        start/stop operation
    • dimensions & weight

      • dimensions (l)(w)(h)
        46" x 22" x 47"
      • weight (lbs)
    • power requirements

      • standard voltages
        404cc subaru ohc electric start (cables are included, battery not included)
    • tank size

      • tank size
        base mounted
  • * Service:

    * Quality:

    * Shipping:

    * Name:


    * Review content:

    Upload your Photo:

    Please only provide JPG,PNG files. Individual photo size cannot exceed 5MB.

    Please check above for the error message and fill in the necessary section.

    Updating Results

    {{ avg_grade }} {{ total }} Reviews
    {{ review.grade }}




  • * Name:


    * Question:

    Please check above for the error message and fill in the necessary section.

    Updating Results

    {{ review.customer_name }}{{ review.date_add }}

    No questions yet. Be the first to ask the question!