40 HP Rotary Screw Air Compressor System with Air Dryer & 240 Gallon Air Tank, Extended Warranty 230/460-Volt, 3-Phase | E40SYS

$17,188.00
  • Capacity 100 - 199 CFM
    Horsepower 40 HP
    Power Electric
    Pressure Rating 125 PSI
    Voltage 230/3/60 Volts, 460/3/60 Volts

    the e-series features state of the art technology, an asymmetric rotary screw profile, and oil injection power.  the design of this system ensures the highest performance during the compression stage, thus reducing energy consumption levels to a minimum.  the result is an excellent ratio between the actual installed power and the effective air yield, which permits considerable energy and cost savings.
     
    load/no load controls with timed shutdown offers one of the most energy efficient control systems on the market. if the compressor doesn’t see a demand within the set time limit (which can be adjusted based on your application), the compressor will completely shut down and restart after the low pressure target has been reached.

    wye delta starting, another energy efficient feature, is also standard.  wye delta starting or reduced voltage starting helps reduce the “in rush” current by 1/3 compared to across the line starting.  (the starters and overload devices are manufactured by siemens)

    our intelligent plc offers signals for pressure, temperature, alarms and maintenance indicators.

    concerned about what else you may need for your air compressor system?  watch steve describe a complete air compressor system, watch steve!
     
    compressor
    (1) 40 horsepower (e40) rotary screw air compressor, base mounted, wye delta reduced voltage starter, tefc drive motor, plc control panel with alarms and indicators with sound enclosure.  standard factory warranty
     
    dryer
    (1) 200 cfm refrigerated air dryer, 460/3/60, 39 degree dewpoint.  standard factory warranty
     
    tank
    (1) 240 gallon vertical air tank rated for 200-psi, exterior primed, asme coded.  standard factory warranty
     
    filtration
    (1) particulate & (1) coalescing filter with float drains


    description

    the e-series features state of the art technology, an asymmetric rotary screw profile, and oil injection power.  the design of this system ensures the highest performance during the compression stage, thus reducing energy consumption levels to a minimum.  the result is an excellent ratio between the actual installed power and the effective air yield, which permits considerable energy and cost savings.

    load/no load controls with timed shutdown offers one of the most energy efficient control systems on the market. if the compressor doesn’t see a demand within the set time limit (which can be adjusted based on your application), the compressor will completely shut down and restart after the low pressure target has been reached.

     

    standard features

    • air cooled after cooler
    • asme coded separator & safety valve
    • belt driven
    • compact & easy to access
    • sound enclosure
    • plc controller
    • maintenance indicators
    • alarms (visual & audible)
    • pressure & temperature readout
    • wye delta reduced voltage starting
    • tefc drive motor
    • phase protection
    • 230/3/60 or 460/3/60
    • load/no load controls with timed shutdown
    • ul listed
    • isolation valve
    • removal cabinet doors for easy maintenance

    wye delta starting
    this technique of starting the motor wired in a wye connection, and later switching to a delta run connection, will dramatically reduce the current demand on a power distribution system. in areas where utility power is limited or over burdened, this system can reduce brown outs and severe voltage drops when a motor is started.
    the wye start/delta run method is not new to the industry. it is used on a limited basis in the us, and more widely used in european countries. sometimes the method is mandatory on large motors.

    • by using the wye start/delta run method, customers can achieve lower starting current demand. 
    • this starting method will minimize current demand during starting and reduce the impact on the power system.  
    • this features is standard on all of our compressor world “e” series machines.

     

     

    air end assembly, offering low speed operation which means longer life, minimizes vibration, noise, and better performance.

    tappered roller bearing, offer high-load resistance, longer operational life.  estimated 70,000+ hours

     

    expert advice. expert support.
    as a compressor world customer you will receive the competitive advantage, accumulated experience and the know-how to maintain an efficient compressed air system.

    consultation
    our compressor world team offers engineering support on all types of compressed air and vacuum systems. you can also go online and find additional information within our “learning center” which offers information on installations, maintenance tips and more.


    products & services - a variety of products, numerous warehouses and an extensive inventory for quick shipments. in addition, our service network offers 24/7 hour emergency service and our online sales engine offers real time quotes and support. compressor world has designed a new, more efficient air compressor sales and service portal – challenge us!




    • product specification

      • capacity (cfm) @ 100/125 psi
        165 cfm @ 125 psi
      • compressor style
        lubricated rotary screw
      • controls
        load/no load controls with timed shutdown
      • dew point
        + 39 f
      • horsepower (hp)
        40 hp
      • tank material
        carbon steel
    • overview & technical details

      • air dryer style
        200 cfm refrigerated air dryer
      • certifications
        ul & asme
      • electrical starting
        wye delta starting
      • power source/type
        electric
    • additional features

      • air dryer included
        included (shipped loose)
      • air filtration included
        included (particulate & fine coalescing filters)
      • tank drain valve
        electronic tank drain
    • dimensions & weight

      • dimensions (l)(w)(h)
        35.2" x 55.5" x 53.25"
      • weight (lbs)
        2500.0000
    • motor data

      • motor type
        tefc
    • filtration grade

      • filtration grade
        0.1 micron
    • tank size

      • air tank configuration
        vertical
      • air tank included
        included
      • air tank size
        240 gallon
    • warranty

      • standard warranty
        1 year parts & labor, 5 year airend warranty
  • * Service:

    * Quality:

    * Shipping:

    * Name:

    Title:

    * Review content:

    Upload your Photo:

    +
    +
    Please only provide JPG,PNG files. Individual photo size cannot exceed 5MB.

    Please check above for the error message and fill in the necessary section.

    Updating Results

    {{ avg_grade }} {{ total }} Reviews
    {{ review.grade }}

    Service:

    Shipping:

    Quality:

  • * Name:

    Email:

    * Question:

    Please check above for the error message and fill in the necessary section.

    Updating Results

    {{ review.customer_name }}{{ review.date_add }}

    Reply:
    No questions yet. Be the first to ask the question!